 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TK07H90A TOSHIBA Field Effect Transistor Silicon N-Channel MOS Type (-MOS IV) TK07H90A Switching Regulator Applications Low drain-source ON resistance High forward transfer admittance Low leakage current Enhancement mode : RDS (ON) = 1.6 (typ.) : |Yfs| =5.0 S (typ.) Unit: mm : IDSS = 100 A (max) (VDS = 720V) : Vth = 2.0~4.0 V (VDS = 10 V, ID = 1 mA) Absolute Maximum Ratings (Ta = 25C) Characteristic Drain-source voltage Drain-gate voltage (RGS = 20 k) Gate-source voltage Drain current DC (Note 1) Symbol VDSS VDGR VGSS ID IDP PD EAS IAR EAR Tch Tstg Rating 900 900 30 7 21 150 491 7 15 150 -55~150 Unit V V V A A W mJ A mJ C C Pulse (Note 1) Drain power dissipation (Tc = 25C) Single-pulse avalanche energy (Note 2) Avalanche current Repetitive avalanche energy (Note 3) Channel temperature Storage temperature range 1: GATE 2: DRAIN (HEAT SINK) 3: SOURCE JEDEC JEITA TOSHIBA 2-16K1A Weight: 3.8 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Thermal Characteristics 2 Characteristic Thermal resistance, channel to case Thermal resistance, channel to ambient Symbol Rth (ch-c) Rth (ch-a) Max 0.833 50 Unit C / W C / W 1 Note 1: Ensure that the channel temperature does not exceed 150C. Note 2: VDD = 90 V, Tch = 25C (initial), L = 18.4 mH, RG = 25 , IAR = 7 A Note 3: Repetitive rating: pulse width limited by maximum channel temperature This transistor is an electrostatic-sensitive device. Handle with care. 3 1 2006-11-13 TK07H90A Electrical Characteristics (Ta = 25C) Characteristic Gate leakage current Gate-source breakdown voltage Drain cutoff current Drain-source breakdown voltage Gate threshold voltage Drain-source ON resistance Forward transfer admittance Input capacitance Reverse transfer capacitance Output capacitance Rise time Symbol IGSS V (BR) GSS IDSS V (BR) DSS Vth RDS (ON) |Yfs| Ciss Crss Coss tr ton VDS = 25 V, VGS = 0 V, f = 1 MHz Test Condition VGS = 30 V, VDS = 0 V IG = 10 A, VDS = 0 V VDS = 720 V, VGS = 0 V ID = 10 mA, VGS = 0 V VDS = 10 V, ID = 1 mA VGS = 10 V, ID = 3.5 A VDS = 10 V, ID = 3.5 A Min -- 30 -- 900 2.0 -- 3.5 -- -- -- Typ. -- -- -- -- -- 1.6 5.0 1650 30 140 50 Max 10 -- 100 -- 4.0 2.0 -- -- -- -- -- pF Unit A V A V V S ID=3.5 -- Turn on time Switching time Fall time 50 tf RL=114 -- 90 -- ns -- 70 -- VDD=400V Turn off time Total gate charge (gate-source plus gate-drain) Gate-source charge Gate-drain ("Miller") charge toff Qg Qgs Qgd VDD 400 V, VGS = 10 V, ID = 7 A -- -- -- -- 240 45 24 21 -- -- -- -- nC Source-Drain Ratings and Characteristics (Ta = 25C) Characteristic Continuous drain reverse current (Note 1) Pulse drain reverse current (Note 1) Forward voltage (diode) Reverse recovery time Reverse recovery charge Symbol IDR IDRP VDSF trr Qrr IDR = 7 A, VGS = 0 V IDR = 7 A, VGS = 0 V dIDR / dt = 100 A / s Test Condition -- -- Min -- -- -- -- -- Typ. -- -- -- 1400 12 Max 7 21 -1.7 -- -- Unit A A V ns C Marking TOSHIBA TK07H90A Part No. (or abbreviation code) Lot No. A line indicates a lead (Pb)-free package or lead (Pb)-free finish. 2 2006-11-13 TK07H90A ID - VDS 5 Common source Tc = 25C Pulse test 10 8 6 10 10 8 ID - VDS 6 5.75 Common source Tc = 25C Pulse test 4 (A) ID 3 5 ID (A) 5.25 8 6 5.5 Drain current Drain current 2 4.75 4.5 4 5.25 5 1 VGS = 4 V 0 0 2 4 6 8 10 2 4.5 0 0 VGS = 4 V 10 20 30 40 50 Drain-source voltage VDS (V) Drain-source voltage VDS (V) ID - VGS 16 VDS - VGS 20 VDS (V) Common source VDS = 10 V Pulse test 16 Common source Tc = 25C Pulse test (A) 12 ID ID = 7 A 12 8 25 Drain-source voltage Drain current 8 3.5 4 1.7 4 100 Tc = -55C 0 0 2 4 6 8 10 0 0 4 8 12 16 20 Gate-source voltage VGS (V) Gate-source voltage VGS (V) Yfs - ID (S) 100 Common source VDS = 10 V Pulse test 10 Tc = -55C 25 1 RDS (ON) - ID 10 Common source Tc = 25C Pulse test VGS = 10 V 1 Forward tranfer admittance 100 Drain-source ON resistance RDS (ON) () Yfs 0.1 0.1 1 10 0.1 0.1 1 10 Drain current ID (A) Drain current ID (A) 3 2006-11-13 TK07H90A RDS (ON) - Tc 5 IDR - VDS 100 Common source Tc = 25C Pulse test Drain-source ON resistance RDS (ON) () 4 IDR 3 ID = 7 A 1.7 2 (A) 10 Common source VGS = 10 V Pulse test Drain reverse current 3.5 1 1 10 5 0 3 -0.4 1 VGS = 0 V -0.8 -1.2 -1.6 0 -80 -40 0 40 80 120 160 0.1 Case temperature Tc (C) Drain-source voltage VDS (V) C - VDS 10000 5 Vth - Tc Vth (V) Common source VDS = 10 V ID = 1 mA Pulse test (pF) Ciss 1000 4 Gate threshold voltage C 3 Capacitance 100 Coss Crss 10 Common source VGS = 0 V f = 1 MHz Tc = 25C 1 10 100 2 1 1 0.1 0 -80 -40 0 40 80 120 160 Drain-source voltage VDS (V) Case temperature Tc (C) PD - Tc 200 Dynamic input/output characteristics 500 VDS (V) VDS 400 200V 300 VDD =100 V 200 VGS 100 400V Common source ID = 7 A Tc = 25C Pulse test 20 (W) 150 Drain power dissipation 100 Drain-source voltage 12 8 50 4 0 0 40 80 120 160 200 0 0 20 40 60 80 0 100 Case temperature Tc (C) Total gate charge Qg (nC) 4 2006-11-13 Gate-source voltage VGS PD 16 (V) TK07H90A Normalized transient thermal impedance rth (t)/Rth (ch-c) rth - tw 10 1 Duty=0.5 0.2 0.1 0.1 0.05 0.02 0.01 0.01 10 Single pulse PDM t T Duty = t/T Rth (ch-c) = 0.833C/W 1 10 100 1 10 100 Pulse width tw (s) Safe operating area 100 1000 EAS - Tch EAS (mJ) Avalanche energy ID max (Pulse) * 100 s * 10 ID max (Continuous) 1 ms * 800 600 (A) Drain current ID 400 1 DC operation Tc = 25C 200 0 25 0.1 * Single nonrepetitive pulse Tc = 25C Curves linearly 0.01 1 must with be derated in VDSS max 10 100 1000 increase 50 75 100 125 150 Channel temperature (initial) Tch (C) temperature. 15 V -15 V BVDSS IAR VDD Test circuit Wave form VDS Drain-source voltage VDS (V) RG = 25 VDD = 90 V, L = 18.4 mH AS = 1 B VDSS L I2 B 2 VDSS - VDD 5 2006-11-13 TK07H90A RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 6 2006-11-13 |
Price & Availability of TK07H90A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |